Kullanım kılavuzu GBC HeatSeal QuickStart H320 Laminasyon makinesi

Kullanım kılavuzu

4

General safeguards

• Use the unit only for its intended purpose of laminating documents.

• Do not place anything in the throat opening of the laminator other than

pouches/documents.

• Place unit on a secure, stable work area to prevent the unit from

falling and possibly causing personal injury and damage to the unit.

• Follow all warnings and instructions

• The socket outlet shall be installed near the equipment and shall be

easily accessible.

• Do not attempt single side lamination, this will destroy the laminator.

• Do not block the vent slots, this will cause the laminator to overheat.

Electrical safeguards

• The unit must be connected to a supply voltage corresponding to the

electrical rating shown on the unit.

• Unplug the unit before moving it, or when it is not in use for an

extended period of time.

• Do not operate with a damaged supply cord or plug. Do not alter the

attachment plug. The plug is congured for the appropriate electrical

supply.

• Do not overload electrical outlets beyond their capacity. Fire or

electrical shock could result.

• The unit is intended for indoor use only.

• Do not spill liquid of any kind on this product.

• Close supervision is required when this product is used near children.

Technical specifications

Electrical

Machine Dimensions

Machine Weight

Maximum Pouch Width

Maximum Pouch Thickness

Maximum Thru-put Thickness

Warm-Up Time (hot lamination)

Ready Time (cold lamination)

Speed

GBC QuickStart H320

230-240V/50hZ/6Amps/1200W

495 x 140 x 117.5mm

3.1kg

317mm

2x125Mic (250 Total)

1.0mm

Approximately 1 minute

Instant

483mm per min

GBC QuickStart H420

230-240V/50hZ/6Amps/1200W

495 x 140 x 117.5mm

3.9kg

317mm

2x175Mic (350 Total)

1.0mm

Approximately 1 minute

Instant

610mm per min

Safety instructions

YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT

TO ACCO

®

BRANDS. IN THIS INSTRUCTION MANUAL AND ON THE

PRODUCT ARE IMPORTANT SAFETY MESSAGES. READ THESE

MESSAGES CAREFULLY.

m

ThIS warnIng IS found on The producT.

Electrical shock hazard.

Do not open. No user

servicable parts inside.

Refer servicing to qualified

service personnel.

WARNING

m

c

This safety message means that you could be seriously hurt or killed if

you open the product and expose yourself to hazardous voltage.

The SafeTY aLerT SYMBoL precedeS each SafeTY

MeSSage In ThIS InSTrucTIon ManuaL.

ThIS SYMBoL IndIcaTeS a poTenTIaL perSonaL

SafeTY haZard ThaT couLd hurT You or oTherS,

aS weLL aS cauSe producT daMage or properTY

daMage.

m

warnIng: for Your proTecTIon do noT connecT

The pouch LaMInaTor To eLecTrIcaL power unTIL

You read TheSe InSTrucTIonS coMpLeTeLY. Keep

TheSe InSTrucTIonS In a conVenIenT LocaTIon for

fuTure reference. To guard agaInST InJurY, The

foLLowIng BaSIc SafeTY precauTIonS MuST Be

oBSerVed In The SeT-up and uSe of ThIS producT.

m

Important safeguards

m

Service

Do not attempt to service or repair the pouch laminator yourself. Unplug

the unit and contact an authorized GBC

®

service representative for any

required repairs.

Derecelendirme

Bu kılavuz hakkında daha fazla bilgi

GBC HeatSeal QuickStart H320 Laminasyon makinesi cihazınız için basılı bir kılavuza sahip olmanın güzel bir şey olduğunun farkındayız. Kılavuzu her zaman web sitemizden indirebilir ve kendiniz yazdırabilirsiniz. Orijinal bir kılavuza sahip olmak istiyorsanız GBC ile iletişime geçmenizi öneririz. Orijinal bir kılavuz sağlayabilirler. GBC HeatSeal QuickStart H320 Laminasyon makinesi cihazınızın kılavuzunu farklı bir dilde mi arıyorsunuz? Ana sayfamızdan tercih ettiğiniz dili seçin ve mevcut olup olmadığını görmek için model numarasını arayın.

Özellikler

GBC Laminasyon makineleri için tüm kılavuzlar
Laminasyon makineleri ile ilgili daha fazla kılavuz

İlgili ürünler

Kullanım kılavuzu

GBC HeatSeal Inspire Laminasyon makinesi

Kullanım kılavuzu

GBC HeatSeal H318 Laminasyon makinesi

Kullanım kılavuzu

GBC Fusion 5100L Laminasyon makinesi

Kullanım kılavuzu

GBC Proseries 3600 Laminasyon makinesi

Kullanım kılavuzu

GBC Fusion 1100L Laminasyon makinesi

Kullanım kılavuzu

GBC Fusion Plus 6000L Laminasyon makinesi

Kullanım kılavuzu

GBC HeatSeal QuickStart H420 Laminasyon makinesi

Kullanım kılavuzu

GBC HeatSeal H215 Laminasyon makinesi

İlgili kategoriler