Kullanım kılavuzu Black and Decker VO1800 Elektrikli süpürge

Kullanım kılavuzu

10

ENGLISH

Switching on and off (fig. A)

The on/off switch (1) can be operated by hand or foot.

 To switch the appliance on, press the on/off switch (1).

 To switch the appliance off, press the on/off switch again.

Adjusting the airflow (fig. I)

Move the airflow control switch (5) to adjust the airflow as desired.

Vacuuming

 When operating the appliance, make sure that the hose is

not trapped, twisted or blocked.

 In case of overheating, a cut-out will operate and the

appliance will automatically stop.

 If the appliance stops operating, unplug the appliance and

allow it to cool for 2-3 hours before continuing.

Hints for optimum use

 When vacuuming stairs, always start at the bottom and

work your way up. Position the appliance on the floor and

do the stairs until halfway. Then carry the appliance to

a stable position which is at least one stair below your

working position, and do the top half of the stairs.

Carrying the appliance (fig. A)

During use the appliance can be carried using the handle (3).

Temporarily parking the suction head (fig. J)

 Use the park position (22) for a temporary parking of the

suction head.

Storing the appliance (fig. K)

Warning! When storing the appliance, switch the appliance off

and unplug it.

 Make sure that the cord is fully rewound.

 Place the appliance in an upright position.

 Park the tube in the park position (28).

 Store the appliance in a dry location.

Maintenance

Your Black & Decker appliance has been designed to operate

over a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper

appliance care and regular cleaning.

Warning! Before performing any maintenance or cleaning on

the appliance, unplug the appliance.

 Regularly clean the ventilation slots in your appliance

using a soft brush or dry cloth.

 Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

Emptying the container (fig. L & M)

The container (8) must be emptied when the maximum mark

is reached.

 Remove the hose.

 Press the release button (30).

 Lift the lid (31) until it locks into position (fig. L).

 Hold the container at the handle (29). Take the container

(8) off the appliance.

 Hold the container over a waste bin.

 Press the release button (32) to open the container (fig. M).

Empty the container as necessary.

 Close the base (33) by moving it upward until the lock

locates in the latch.

 Re-insert the container into the appliance.

 Close the lid until it locks into place.

Cleaning

Warning! Before cleaning and maintenance, switch the

appliance off and unplug it.

 From time to time wipe the appliance with a damp cloth.

Do not use any abrasive or solvent-based cleaner.

Do not immerse the appliance in water.

Cleaning the container filter (fig. L - O)

The container filter prevents dust and dirt from entering the

motor housing. The filter is re-usable. To maintain efficient

suction performance, the filter should be cleaned every week,

or whenever suction performance is noticeably reduced.

The appliance is fitted with a bypass valve. When the filter is

clogged, the operation of the valve is audible. This is normal

and does not indicate a problem. Switch off the appliance and

remove the plug from the socket before cleaning the filters.

 Remove the container (8) from the appliance (fig. L).

 Empty the container (fig. M).

 Remove the cartridge (34) by turning counterclockwise

(fig. N).

 Loosen the filter (35) and remove it from the container.

 Shake off excess dust by tapping the filter into a dustbin.

Warning! Do not brush or use compressed air to clean the

filter.

 Depending on its condition, rinse the outside of the filter

with water. Allow the filter to dry for 24 hours before

re-inserting it.

Warning! Do not wash the inside of the filter.

 Take out the filter assembly (36) located right below the grid

and brush off any loose dust before re-inserting it (fig. O).

 Replace the container filter and tighten it.

 Re-fit the cartridge.

 After replacing the filter, close the container.

 Re-insert the container into the appliance.

Derecelendirme

Bu kılavuz hakkında daha fazla bilgi

Black and Decker VO1800 Elektrikli süpürge cihazınız için basılı bir kılavuza sahip olmanın güzel bir şey olduğunun farkındayız. Kılavuzu her zaman web sitemizden indirebilir ve kendiniz yazdırabilirsiniz. Orijinal bir kılavuza sahip olmak istiyorsanız Black and Decker ile iletişime geçmenizi öneririz. Orijinal bir kılavuz sağlayabilirler. Black and Decker VO1800 Elektrikli süpürge cihazınızın kılavuzunu farklı bir dilde mi arıyorsunuz? Ana sayfamızdan tercih ettiğiniz dili seçin ve mevcut olup olmadığını görmek için model numarasını arayın.

Özellikler

Black and Decker Elektrikli süpürgeler için tüm kılavuzlar
Elektrikli süpürgeler ile ilgili daha fazla kılavuz

Black and Decker VO1800 Elektrikli süpürge hakkında Sıkça Sorulan Sorular

Destek ekibimiz faydalı ürün bilgileri arar ve sıkça sorulan soruları cevaplar. Sıkça sorulan sorularda hatalı bir cevaba rastlamanız halinde lütfen bunu iletişim formunu kullanarak bize bildirin.

İlgili ürünler

Kullanım kılavuzu

Black and Decker VB2000 Elektrikli süpürge

Kullanım kılavuzu

Black and Decker FV1201 Elektrikli süpürge

Kullanım kılavuzu

Black and Decker VL1620 Elektrikli süpürge

Kullanım kılavuzu

Black and Decker VL1840 Elektrikli süpürge

Kullanım kılavuzu

Black and Decker VO1800A Elektrikli süpürge

Kullanım kılavuzu

Black and Decker VB2010P Elektrikli süpürge

Kullanım kılavuzu

Black and Decker VO1810 Elektrikli süpürge

Kullanım kılavuzu

Black and Decker VN2000 Elektrikli süpürge

İlgili kategoriler