Kullanım kılavuzu Collomix Xo 1 Çimento karıştırıcı

Kullanım kılavuzu

EN

Proper use

The machine is designed for mixing liquid and

powder-based building products such as paints,

mortar, adhesives, plaster and similar substances.

Use the right mixing tool for the consistency of the

material and the quantity to be mixed.

Please refer to the information in the technical data

when choosing the size of mixing tool (diameter/

mixing action). If the wrong mixing action or mixing

tool diameter is selected, this may cause the

machine/gear unit to become overloaded and lead

to damage as a result. Please remember that a

mixing tool with a mixing action from the top down

puts a greater strain on the electrical tool than one

with the reverse mixing action.

This electrical tool is not designed for use in

continuous operation.

Given the high torque levels generated by the

machine, it must not be used as a power drill.

The machine must not be used for the preparation

of foodstuffs.

The machine is not suitable for mixing materials

containing graphite dust, brine or slurry. Mixing of

these materials or substances may damage the

machine beyond repair.

Assembly

Operation

►Always pull the power plug out of the socket outlet

before carrying out any work on the machine.

Fitting the mixing tool mount:

Take the HEXAFIX coupling or size M14 adapter

supplied with the packaging and screw it to the male

thread of the mixing shaft.

Fitting the mixing tool / tool change-over:

HEXAFIX (Fig. A)

Insert the mixing tool with the HEXAFIX mount in

the coupling until it locks. To release or change

the mixing tools, simply pull back the handle-collar

on the coupling and this releases the mixing tool.

(Fig. C)

M14 (Fig. B)

Screw the mixing tool with a size M14 male thread

into the M14 adapter on the mixing shaft. The mixing

tool tightens itself during operation.

To release the mixing tool you will need one SW 22

and one SW 24 open-ended wrench. Place the one

open-ended wrench on the adapter and the other on

the hexagonal holding xture and turn them both in

opposite directions to one another until the mixing

tool is released.

▼Check that the power supply shown on the rating plate is

the same as the mains power supply.

Always hold the machine with both hands.

Press the starting lockout button (1).

Press the ON/OFF switch (2).

The more pressure you

apply to the ON/OFF switch,

the faster the machine will

run. e ON/OFF switch

cannot be locked!

Always work with the ON/

OFF switch fully pressed.

To stop working, release the ON/OFF switch.

Machines with 2-speed gear units (Xo4/Xo6) have

two maximum speeds available (First gear: Slow /

Second gear: Fast).

To change from one gear to the other, turn the gear

selection lever through 180°.

Only ever actuate it when the

machine is at a standstill.

Always reduce the speed

when submerging the mixing

tool in the mixing material or

lifting it out. Once the mixing

tool is fully submerged,

increase the speed again to ensure that the motor is

adequately cooled.

During mixing you should guide the machine around

the mixing container. Continue mixing until all of the

mixing material is completely mixed. Please follow

the processing instructions of the manufacturer of

the material.

The greater the viscosity of the material, the greater

the impact of the torque forces on the machine, so

you should be prepared for this when you carry out

your work.

If the mixing tool comes into contact with a surface

(e.g. the bottom of the tub) while running, it may kick

back.

Set the machine down resting on the guard handle aer

you have nished your mixing work.

For transportation purposes the HEXFIX mixing tool

can be inserted through the hexagon punch-hole

provided in the handle frame.

1.

2.

Xo1_4_6_BA_24spr_Rev4.indd 10 29.01.2013 15:19:42

Derecelendirme

Bu kılavuz hakkında daha fazla bilgi

Collomix Xo 1 Çimento karıştırıcı cihazınız için basılı bir kılavuza sahip olmanın güzel bir şey olduğunun farkındayız. Kılavuzu her zaman web sitemizden indirebilir ve kendiniz yazdırabilirsiniz. Orijinal bir kılavuza sahip olmak istiyorsanız Collomix ile iletişime geçmenizi öneririz. Orijinal bir kılavuz sağlayabilirler. Collomix Xo 1 Çimento karıştırıcı cihazınızın kılavuzunu farklı bir dilde mi arıyorsunuz? Ana sayfamızdan tercih ettiğiniz dili seçin ve mevcut olup olmadığını görmek için model numarasını arayın.

Özellikler

Collomix Çimento karıştırıcılar için tüm kılavuzlar
Çimento karıştırıcılar ile ilgili daha fazla kılavuz

Collomix Xo 1 Çimento karıştırıcı hakkında Sıkça Sorulan Sorular

Destek ekibimiz faydalı ürün bilgileri arar ve sıkça sorulan soruları cevaplar. Sıkça sorulan sorularda hatalı bir cevaba rastlamanız halinde lütfen bunu iletişim formunu kullanarak bize bildirin.

İlgili ürünler

Kullanım kılavuzu

Collomix ErgoMix 1000 Çimento karıştırıcı

Kullanım kılavuzu

Collomix Xo 6 Çimento karıştırıcı

Kullanım kılavuzu

Collomix Xo 4 Çimento karıştırıcı

Kullanım kılavuzu

Collomix ErgoMix 1300 Çimento karıştırıcı

Kullanım kılavuzu

Collomix Xo 55 duo Çimento karıştırıcı

Kullanım kılavuzu

Bosch GRW 12 E Çimento karıştırıcı

Kullanım kılavuzu

Toolson HMD1800PRO Çimento karıştırıcı

Kullanım kılavuzu

Bosch GRW 18-2 E Çimento karıştırıcı

İlgili kategoriler