Kullanım kılavuzu Dolmar MS-27U Çali tırpanı

Kullanım kılavuzu

4

– Start the brush cutter/string trimmer only in accordance with the instructions.

Do not use any other methods to start the engine!

– Only use the brush cutter/string trimmer and tools for the specified purposes.

– Only start the brush cutter/string trimmer engine after the equipment is fully

assembled. Do not operate the equipment until all of the appropriate

accessories are attached!

– Before starting, make sure that the cutting tool is not in contact with hard objects

such as branches, stones etc. as the cutting tool will rotate when starting.

– Switch off the engine immediately if any type of engine problem occurs.

– Should the cutting tool hit stones or other hard objects, immediately switch off

the engine and inspect the cutting tool.

– Inspect the cutting tool at short regular intervals for damage (inspect for

hairline cracks using the tapping test).

– Only operate the brush cutter/string trimmer after attaching and adjusting the

shoulder strap to the correct length. The shoulder strap must be adjusted to

the user’s size and fastened to prevent fatigue during operation of the

equipment. Never hold the cutter with one hand during operation.

– During operation, always hold the brush cutter/string trimmer with both hands.

Always ensure you are on safe footing.

– Operate the brush cutter/string trimmer in such a manner as to avoid

inhalation of the exhaust gases. Never run the engine in an enclosed space

such as inside a room (risk of gas poisoning). Carbon monoxide is an odorless

gas.

– Always switch off the engine when resting, or if you intend to leave the brush

cutter/string trimmer unattended, and place it in a safe location to prevent

injury to other people and damage to the equipment.

– Never put the hot brush cutter/string trimmer onto dry grass or onto any other

combustible materials.

– The cutting tool must always be equipped with the appropriate guard.

Never run the cutter without this guard!

– All protective installations and guards supplied with the equipment must be

used during operation.

– Never operate the engine if the exhaust muffler is faulty.

– Shut off the engine during transport.

– When transporting the equipment, always attach the cover to the cutting

blade.

– Ensure the brush cutter/string trimmer is positioned safely during transport to

avoid fuel leakage.

– When transporting the brush cutter/string trimmer, ensure the fuel tank is

completely empty.

– When unloading the brush cutter/string trimmer from a truck or other such

vehicle, never drop the engine to the ground, as doing so may severely

damage the fuel tank.

– Unless in an emergency, never drop or cast the brush cutter/string trimmer to

the ground as doing so may severely damage the brush cutter/string trimmer.

– Always lift the entire equipment from the ground when moving it. Dragging the

equipment on its fuel tank is extremely dangerous and may cause fuel to leak,

which may cause fire.

– If the equipment gets heavy impact or fall, check the condition before

continuing work. Check the fuel system for fuel leakage and the controls and

safety devices for malfunction. If there is any damage or doubt, ask our

authorized service center for the inspection and repair.

Refuelling

– Shut off the engine during refuelling, keep away from open flames and do not

smoke during refuelling.

– Ensure mineral oil products do not come into contact with skin. Do not inhale

the fuel vapor. Always wear protective gloves during refuelling. Change and

clean protective clothing at regular intervals.

– To prevent soil contamination (environmental protection), make sure you do

not spill fuel or oil on the ground. If you do spill fuel, clean the brush cutter/

string trimmer immediately.

– Make sure fuel does not come into contact with your clothing. If fuel does

come into contact with your clothing, change your clothing immediately to

prevent fire.

– Inspect the fuel cap at regular intervals to make sure that it can be securely

fastened and does not leak.

– Carefully tighten the fuel tank cap. Once refuelling is complete, move to a

location at least 3 meters away from where you refuelled before starting the

engine.

– Never refuel in an enclosed space such as inside a room. Doing so may cause

an explosion due to the accumulation of fuel vapor at ground level.

• Resting

• Transport

• Refuelling

• Maintenance

• Tool Replacement

Derecelendirme

Bu kılavuz hakkında daha fazla bilgi

Dolmar MS-27U Çali tırpanı cihazınız için basılı bir kılavuza sahip olmanın güzel bir şey olduğunun farkındayız. Kılavuzu her zaman web sitemizden indirebilir ve kendiniz yazdırabilirsiniz. Orijinal bir kılavuza sahip olmak istiyorsanız Dolmar ile iletişime geçmenizi öneririz. Orijinal bir kılavuz sağlayabilirler. Dolmar MS-27U Çali tırpanı cihazınızın kılavuzunu farklı bir dilde mi arıyorsunuz? Ana sayfamızdan tercih ettiğiniz dili seçin ve mevcut olup olmadığını görmek için model numarasını arayın.

Özellikler

Dolmar Çali tırpanları için tüm kılavuzlar
Çali tırpanları ile ilgili daha fazla kılavuz

İlgili ürünler

Kullanım kılavuzu

Oleo-Mac BC 241 S Çali tırpanı

Kullanım kılavuzu

Hurricane HBI 80 Çali tırpanı

Kullanım kılavuzu

Oleo-Mac BC 270 S Çali tırpanı

Kullanım kılavuzu

Ryobi RBC254SBO Çali tırpanı

Kullanım kılavuzu

Oleo-Mac BC 300 S Çali tırpanı

Kullanım kılavuzu

Bosch GFR 25 Professional Çali tırpanı

Kullanım kılavuzu

Oleo-Mac BC 350 S Çali tırpanı

Kullanım kılavuzu

Bosch GFR 42 Professional Çali tırpanı

İlgili kategoriler