56 VOLT LITHIUM-ION CORDLESS BLOWER — LB6150E/LB6700E6
as screws, nuts, bolts, caps, etc. Tighten securely all
fasteners and caps and do not operate this product until
all missing or damaged parts are replaced.
WARNING: Always wear eye protection, along with
hearing protection. Failure to do so could result in objects
being thrown into your eyes and other possible serious
injuries.
WARNING: The operation of any machines can
result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning
machine operation, always wear safety goggles or safety
glasses with side shields and a full face shield when
needed. We recommend a Wide Vision Safety Mask for
use over eyeglasses or standard safety glasses with side
shields.
ATTACHING/DETACHING THE BATTERY PACK (FIG. D)
Use only with EGO’s battery packs and chargers listed in
Fig. A.
FULLY CHARGE BEFORE FIRST USE
To attach
Align the battery ribs with the mounting slots and press
the battery pack down until you hear a “click”.
D-1
Battery-release
button
D-2 Mounting Slot
D-3 Battery Rib
To detach
Depress the battery-release button and pull the battery
pack out.
STARTING/STOPPING THE BLOWER (FIG. E)
Air-speed trigger only
1. Depress the air-speed trigger to turn on the blower.
2. The air speed of the blower is controlled with the
variable speed trigger. More pressure on the trigger
results in higher blowing speeds; less pressure on
the trigger results in lower blowing speeds. Adjust
the speed to suit the task at hand.
3. Release the air-speed trigger to turn off the blower.
Speed/Lock-on dial only
The blower can be locked at any speed with the speed
lock-on dial.
1. Turn the speed/lock-on dial clockwise to start the
blower. The air speed will increase as the dial is
rotated clockwise.
2. To decrease the air speed, turn the speed/lock-on
dial counterclockwise.
ASSEMBLY
WARNING: If any parts are damaged or missing,
do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING: Do not attempt to modify this product
or create accessories not recommended for use with this
blower. Any such alteration or modification is misuse and
could result in a hazardous condition leading to possible
serious personal injury.
WARNING: To prevent accidental starting that could
cause serious personal injury, always remove the battery
pack from the machine when assembling parts.
APPLICATION
You may use this product for the purposes listed below:
◾ Clearing hard surfaces such as driveways and
walkways.
◾ Keeping decks and driveways free from leaves and
pine needles.
NOTICE: The tool is to be used only for its prescribed
purpose. Any other use is deemed to be a case of misuse.
ASSEMBLING/REMOVING THE BLOWER TUBE
◾ To Assemble (Fig. B1 & B2)
Align the groove and push the tube onto the blower
housing until the latch snaps into place.
◾ To Remove (Fig. B3)
Press and hold the tube-release button to disengage the
latch, then pull the tube straight from the blower.
ASSEMBLING/REMOVING THE BLOWER TAPERED
NOZZLE
◾ To Assemble (Fig. C1 & C2)
Align the groove in the tapered nozzle with the tube knob
and push the nozzle onto the tube until it snaps into place.
◾ To Remove (Fig. C3)
Press and hold the nozzle-release button to disengage the
latch, then pull the nozzle straight from the blower tube.
Follow the same sequence to assemble or remove the
spread nozzle (only for LB6700E).
OPERATION
WARNING: Before each use, inspect the entire
product for damaged, missing, or loose parts, such
Bu ürün hakkındaki sohbete katıl
Burada EGO LB6704E Yaprak temizleyici hakkında ne düşündüğünüzü paylaşabilirsiniz. Bir sorunuz varsa öncelikle kılavuzu dikkatlice okuyun. Kılavuz talebinde bulunmak için iletişim formumuzu kullanabilirsiniz.