Kullanım kılavuzu EGO PTX5100 Çalı makası

Kullanım kılavuzu

56-VOLT LITHIUM-ION HEDGE TRIMMER ATTACHMENT — PTX5100 7

EN

tool is used; In order to protect the operator, user should wear

gloves and ear protectors in the actual conditions of use.

DESCRIPTION

KNOW YOUR HEDGE TRIMMER ATTACHMENT (Fig. A1)

1. Rear Bushing

2. Front Bushing

3. Motor Housing

4. Blade Sheath

5. Blade

PACKING LIST (A2)

ASSEMBLY

WARNING: If any parts are damaged or missing,

do not operate this product until the parts are replaced.

Use of this product with damaged or missing parts could

result in serious personal injury.

WARNING: Always remove the battery pack from

the product when you are assembling parts, making

adjustments, cleaning, or when the product is not in use.

CUTTING HEAD ANGLE ADJUSTMENT

When the hedge trimmer attachment is taken out from the

package, it has been folded in its storage position (Fig. B).

The articulation angle and radial rotation of cutting head

can be adjusted independently. Adjust the cutting head to

a suitable working position before operation.

Articulation Angle Adjustment

There are six working positions. The angle of the cutting

blade can be adjusted from -68°to 42°(Fig. C).

1. Pull back the front bushing, and then firmly hold the

motor cover to rotate the cutting angle to the desired

position.

C-1 Front Bushing

C-2 Rear Bushing

2. Once the desired angle is reached, push forward the

bushing to lock the position of cutting head.

Radial Rotation Adjustment

There are two vertical cutting positions (Fig. D). It can be

adjusted to the left or right 90°.

1. Pull back the rear bushing, and then firmly hold

the motor cover to rotate the blade to the desired

position.

2. Once the desired angle is reached, push forward the

bushing to lock the position of cutting head.

WARNING: To reduce the risk of injury, remove

the battery before making adjustments and make

adjustments only when the blades are at a standstill.

Never touch the blades while making adjustments.

WARNING: The casting alloy gear case is hot. Never

touch the casting alloy gear case surface without wearing

a PPE gloves.

CONNECTING/REMOVING THE HEDGE TRIMMER

ATTACHMENT TO THE TELESCOPIC POWER POLE (FIG.E)

This hedge trimmer attachment is designed for use with

EGO telescopic power pole PPX1000.

See “INSTALLING AN ATTACHMENT TO THE

TELESCOPIC POWER POLE” section in the telescopic

power pole PPX1000 operator’s manual for connecting the

hedge trimmer to the power pole.

See “REMOVING THE ATTACHMENT FROM THE

TELESCOPIC POWER POLE” section in the telescopic

power pole PPX1000 operator’s manual to remove the

hedge trimmer from the power pole.

MOUNTING THE TIP PROTECTOR (Optional)

1. Use a hex wrench (not included) to remove the short

bolt, plain washer, bush and nut at the end of the

cutting blade Save the plain washer, bush and nut for

reassembly (Fig. F).

F-1 Nut F-3 Plain Washer

F-2 Bush F-4 Short Bolt

2. Align the tip protector with the bulge on the cutting

blade and mount it into place. Secure it with the new

long bolt and nut as well as the saved washer, bush

and nut (Fig. G).

G-1 Nut G-4 Bush

G-2 Tip Protector G-5 Plain Washer

G-3 Nut G-6 Long Bolt

OPERATION

DANGER: Never cut near power lines, electric

cords, or other electric sources. If the cutting blades

jam on any electrical cord or line, DO NOT TOUCH THE

BLADE OR THE ALUMINUM POLE! THEY CAN BECOME

ELECTRICALLY LIVE AND MAY BE VERY DANGEROUS.

Continue to hold the hedge trimmer attachment by the

insulated handle or lay it down and away from you in a safe

manner. Disconnect the electrical service to the damaged

Derecelendirme

Bu kılavuz hakkında daha fazla bilgi

EGO PTX5100 Çalı makası cihazınız için basılı bir kılavuza sahip olmanın güzel bir şey olduğunun farkındayız. Kılavuzu her zaman web sitemizden indirebilir ve kendiniz yazdırabilirsiniz. Orijinal bir kılavuza sahip olmak istiyorsanız EGO ile iletişime geçmenizi öneririz. Orijinal bir kılavuz sağlayabilirler. EGO PTX5100 Çalı makası cihazınızın kılavuzunu farklı bir dilde mi arıyorsunuz? Ana sayfamızdan tercih ettiğiniz dili seçin ve mevcut olup olmadığını görmek için model numarasını arayın.

Özellikler

EGO Çalı makaslar için tüm kılavuzlar
Çalı makaslar ile ilgili daha fazla kılavuz

EGO PTX5100 Çalı makası hakkında Sıkça Sorulan Sorular

Destek ekibimiz faydalı ürün bilgileri arar ve sıkça sorulan soruları cevaplar. Sıkça sorulan sorularda hatalı bir cevaba rastlamanız halinde lütfen bunu iletişim formunu kullanarak bize bildirin.

İlgili ürünler

Kullanım kılavuzu

EGO HTX5300-PA Çalı makası

Kullanım kılavuzu

EGO HT6500E Çalı makası

Kullanım kılavuzu

EGO HT2400E Çalı makası

Kullanım kılavuzu

EGO HT2000E Çalı makası

Kullanım kılavuzu

EGO HT2410E Çalı makası

Kullanım kılavuzu

EGO HT2001E Çalı makası

Kullanım kılavuzu

EGO HT5100E Çalı makası

Kullanım kılavuzu

EGO HT2411E Çalı makası

İlgili kategoriler