Kullanım kılavuzu Greenworks GD60CS40 Motorlu testere

Kullanım kılavuzu

1 DESCRIPTION

1.1 PURPOSE

This chainsaw is designed for cutting branches, trunks, logs

and beams of a diameter determined by the cutting length of

the guide bar. It is only designed to cut wood.

It is only to be used in an outdoor, domestic application by

adults.

Do not use the chainsaw for any purpose not listed above.

This chainsaw is not to be used for professional tree services.

It is not to be used by children or by persons not wearing

adequate personal protective equipment and clothing.

1.2 OVERVIEW

Figure 1-22

1

Guide bar cover

2

Front handle guard /

chain brake

3

Front handle

4

Lock out button

5

Trigger

6

Oil tank cap

7

Oil indicator

8

Spike bumpers

9

Saw chain

10

Guide bar

11

Wrench

12

Rear handle

13

Chain tension screw

14

Chain cover

15

Chain cover nuts

16

Bolt for saw chain

tension

17

Sprocket

18

Battery release button

19

Oil outlet

20

Bar groove

21

Chain drive links

22

Cutter

23

Felling direction

24

Danger zone

25

Escape route

26

Direction of fall

27

Notch

28

Felling back cut

29

Hinge

30

Limb cut

31

Keep work off

ground leave support

limbs until log is cut

32

Log supported along

the entire length

33

Cut from top (over

buck) avoid cutting

earth

34

Log supported one

end

35

Under buck

36

Over buck

37

Log supported both

ends

38

Bucking a log

39

Stand on uphill side

when cutting because

log may roll

2 SAFETY

WARNING

Make sure that you do/obey all safety instructions.

Refer to Safety Manual.

3 INSTALLATION

WARNING

Do not change or make accessories that are not

recommended by the manufacturer.

WARNING

Do not put in the battery pack until you assemble all the

parts.

3.1 UNPACK THE MACHINE

WARNING

Make sure that you correctly assemble the machine before

use.

WARNING

• If the parts are damaged, do not use the machine.

• If you do not have all the parts, do not operate the

machine.

• If the parts are damaged or missing, speak to the service

center.

1. Open the package.

2. Read the documentation in the box.

3. Remove all the unassembled parts from the box.

4. Remove the machine from the box.

5. Discard the box and package in compliance with local

regulations.

3.2 ADD THE BAR AND CHAIN

LUBRICANT

Examine the amount of oil in the machine. If the oil level is

low, add the bar and chain lubricant as follows.

IMPORTANT

Use bar and chain lubricant that is only for chains and chain

oilers.

NOTE

The machine comes from the factory without bar and chain

lubricant.

1. Loosen and remove the cap from the oil tank.

2. Put the oil into the oil tank.

3. Monitor the oil indicator to make sure that no dirt in the

oil tank while you add the oil.

4. Put the oil cap on.

5. Tighten the oil cap.

6. The whole oil tank will last for 15 - 40 minutes.

5

English

EN

Derecelendirme

Bu kılavuz hakkında daha fazla bilgi

Greenworks GD60CS40 Motorlu testere cihazınız için basılı bir kılavuza sahip olmanın güzel bir şey olduğunun farkındayız. Kılavuzu her zaman web sitemizden indirebilir ve kendiniz yazdırabilirsiniz. Orijinal bir kılavuza sahip olmak istiyorsanız Greenworks ile iletişime geçmenizi öneririz. Orijinal bir kılavuz sağlayabilirler. Greenworks GD60CS40 Motorlu testere cihazınızın kılavuzunu farklı bir dilde mi arıyorsunuz? Ana sayfamızdan tercih ettiğiniz dili seçin ve mevcut olup olmadığını görmek için model numarasını arayın.

Özellikler

Greenworks Motorlu testereler için tüm kılavuzlar
Motorlu testereler ile ilgili daha fazla kılavuz

Greenworks GD60CS40 Motorlu testere hakkında Sıkça Sorulan Sorular

Destek ekibimiz faydalı ürün bilgileri arar ve sıkça sorulan soruları cevaplar. Sıkça sorulan sorularda hatalı bir cevaba rastlamanız halinde lütfen bunu iletişim formunu kullanarak bize bildirin.

İlgili ürünler

Kullanım kılavuzu

Greenworks CD40CS15 Motorlu testere

Kullanım kılavuzu

Greenworks GD24CS30 Motorlu testere

Kullanım kılavuzu

Greenworks GD40CS18 Motorlu testere

Kullanım kılavuzu

Greenworks GD40TCS Motorlu testere

Kullanım kılavuzu

Dolmar 109 Motorlu testere

Kullanım kılavuzu

Makita DUC353PG4J Motorlu testere

Kullanım kılavuzu

Atika KS 1800/35 Motorlu testere

Kullanım kılavuzu

EGO CSX5000 Motorlu testere

İlgili kategoriler