Kullanım kılavuzu Hitachi H 41MB Kırıcı

Kullanım kılavuzu

3

English

DEMOLITION HAMMER SAFETY

WARNINGS

1. Wear ear protectors.

Exposure to noise can cause hearing loss.

2. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

3. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord.

Cutting accessory contacting a “live” wire may make

exposed metal parts of the power tool “live” and could

give the operator an electric shock.

ADDITIONAL SAFETY WARNINGS

1. Ensure that the power source to be utilized conforms

to the power requirements specifi ed on the product

nameplate.

2. Ensure that the power switch is in the OFF position.

If the plug is connected to a receptacle while the power

switch is in the ON position, the power tool will start

operating immediately, which could cause a serious

accident.

3. When the work area is removed from the power source,

use an extension cord of suffi cient thickness and rated

capacity. The extension cord should be kept as short as

practicable.

4. Do not touch the bit during or immediately after

operation. The bit becomes very hot during operation

and could cause serious burns.

5. Before starting to break, chip or drill into a wall, fl oor or

ceiling, thoroughly confi rm that such items as electric

cables or conduits are not buried inside.

6. Even when the switch is on, the motor is running and

the tool head is pressed to the demolition surface, the

hammer sometimes does not start operating. In these

instances, turn the switch off , press the tool head against

the demolition surface again, and turn the switch on and

off . This should start the demolition hammer operating.

Repeat this procedure for several minutes, and the

demolition hammer will heat, after which it will operate

when switched to ON-LOCK.

7. When using tools such as bull points, cutters, etc.,

make sure to use the genuine parts designated by our

company.

8. Be sure to grip the handle and side handle during work.

Do not hold by the grip (A) during work. If you pull it by

mistake, the bull point could jump out.

9. RCD

The use of a residual current device with a rated residual

current of 30mA or less at all times is recommended.

SYMBOLS

WARNING

The following show symbols used for the machine.

Be sure that you understand their meaning before

use.

H41MB : Demolition Hammer

Read all safety warnings and all instructions.

Only for EU countries

Do not dispose of electric tools together with

household waste material!

In observance of European Directive 2002/96/

EC on waste electrical and electronic equipment

and its implementation in accordance with

national law, electric tools that have reached

the end of their life must be collected separately

and returned to an environmentally compatible

recycling facility.

Switching ON

Switching OFF

Disconnect mains plug from electrical outlet

Class II tool

STANDARD ACCESSORIES

In addition to the main unit (1), the package contains the

accessories listed in the below.

○ Case .............................................................................1

○ Bull Point (SDS-max shank) .........................................1

○ Side Handle ..................................................................1

Standard accessories are subject to change without notice.

APPLICATIONS

Demolishing concrete, chiseling off concrete, grooving, bar

cutting.

Application examples:

Installation of piping and wiring, sanitary facility installation,

machinery installation, water supply and drainage work,

interior jobs, harbor facilities and other civil engineering

works.

SPECIFICATIONS

Voltage (by areas)

(110 V, 230 V, 240 V)

Power Input 930 W

Full-load Impact Rate 3000 min

-1

Weight

(without cord, side handle)

5.1 kg

NOTE

Due to HITACHI’s continuing program of research and

development, the specifi cations herein are subject to

change without prior notice.

MOUNTING AND OPERATION

Action Figure Page

Mounting a tool 1 85

Deciding working position of tool 2 85

Switch operation 3 85

How to use the demolition hammer* 4 85

Replacing carbon brushes 5 85

Selecting accessories ― 86

000BookH41MB.indb3000BookH41MB.indb3 2014/10/2214:47:422014/10/2214:47:42

Derecelendirme

Bu kılavuz hakkında daha fazla bilgi

Hitachi H 41MB Kırıcı cihazınız için basılı bir kılavuza sahip olmanın güzel bir şey olduğunun farkındayız. Kılavuzu her zaman web sitemizden indirebilir ve kendiniz yazdırabilirsiniz. Orijinal bir kılavuza sahip olmak istiyorsanız Hitachi ile iletişime geçmenizi öneririz. Orijinal bir kılavuz sağlayabilirler. Hitachi H 41MB Kırıcı cihazınızın kılavuzunu farklı bir dilde mi arıyorsunuz? Ana sayfamızdan tercih ettiğiniz dili seçin ve mevcut olup olmadığını görmek için model numarasını arayın.

Özellikler

Hitachi Kırıcılar için tüm kılavuzlar
Kırıcılar ile ilgili daha fazla kılavuz

Hitachi H 41MB Kırıcı hakkında Sıkça Sorulan Sorular

Destek ekibimiz faydalı ürün bilgileri arar ve sıkça sorulan soruları cevaplar. Sıkça sorulan sorularda hatalı bir cevaba rastlamanız halinde lütfen bunu iletişim formunu kullanarak bize bildirin.

İlgili ürünler

Kullanım kılavuzu

Hitachi H 70SA Kırıcı

Kullanım kılavuzu

Bosch GSH 11 VC Professional Kırıcı

Kullanım kılavuzu

FERM HDM1040P Kırıcı

Kullanım kılavuzu

Stomer SHD-1500-K Kırıcı

Kullanım kılavuzu

Makita HM004G Kırıcı

Kullanım kılavuzu

Hikoki H 41ME Kırıcı

Kullanım kılavuzu

Milwaukee MXF DH2528H-602 Kırıcı

Kullanım kılavuzu

Bosch GSH 3 E Professional Kırıcı

İlgili kategoriler