Kullanım kılavuzu Hoover DVE01BL 011 Elektrikli süpürge

Kullanım kılavuzu

3

WARNING:Itisrecommendedtoavoidpotentialscratchingofwoodenoorsthat

thepedalisnotsetonHardoormodeandtheslideronDeepcarpetcleaning.

Usingtheexitubewithaccessories:

The exi tube gives you the maximum exibility of usage. It can be used alone or

combined with the accessories, as desired. To vacuum with the supplied accessories:

1. Select accessory mode by rotating the carry handle/accessory mode activator to

accessory position until locked in position. [6]

2. Remove the exi tube from the location in the back of the cleaner handle. [7]

3. To use the extension tube: remove the tube from the door by unclipping from the

top. [8] Attach to the exitube. [10a]

4. To use the dusting brush: remove the tool from the location in the body of the

product by pressing the middle of the component [9a] then unclipping from the top.

[9b] Attach to the exitube. [10b]

5. To return to oor vacuuming push the oor mode button. [11]

IMPORTANT - When using cleaning tools, the cleaner must be kept in the upright

position, and held. It must not be used in the stand alone position without the user holding

the product. [12]

CLEANER MAINTENANCE

EMPTYING THE DUST BIN ASSEMBLY *

a) Lay the cleaner on a at surface, pull back the door release button and remove the

transparent door. [13]

b) Remove the bin assembly. [14]

c) Remove the bin top cover assembly from the container, by rotating the container and

bin top cover in opposite directions. [15]

d) Empty the debris from the container into a bin. [16] Check if it is necessary to clean

the relative lters, as described in the “Maintaining the lters” section.

e) Ret bin top cover to container assemble the dust container and lter assembly to the

product ensuring you keep the container ribs aligned with the cleaner body as shown

[20b], once aligned push dust bin assembly fully into position.

NOTE: Hoover recommends to inspect and wash if necessary, the mesh and the lters

after each full container, see maintaining lters section.

MAINTAINING THE FILTERS *

a) To access the washable HEPA lter, rotate the mesh lter assembly in the opposite

direction from the bin top cover. [15b]

b) Remove the mesh and remove all dust and debris, wash mesh if required but ensure

it is dry before retting. [17a]

c) Gently tap the lter to remove any excess dust and if required wash the HEPA lter

*Certain Models Only ** Certain models only, nozzles may vary according to model

thoroughly under hand warm water until water runs clear. [17b]

d) Remove excess water by shaking and leave to dry for 24 hours. [18] Ret lters to the

cleaner only when completely dry.

e) When retting the lter ensure mesh is assembled correctly as per [8d] then reassemble

lter to bin top cover [19b] and nally t to container ensuring correct alignment. [19a]

f) To ret the dust container and lters assembly to the product [21], ensure you keep the

container ribs aligned with the cleaner body as shown [20b], once aligned push dust bin

assembly fully into position.

DONOTUSEHOTWATERORDETERGENTS.

IMPORTANT: Ensure the bagless lters, mesh and HEPA, are tted before use.

ACCESSORIES

To obtain the best performance and efciency it is recommended that the correct nozzles

are used for the main cleaning operations. These nozzles are indicated in the diagrams

by the letters GP, HF or CA.

A nozzle type GP can be used to clean both carpet and hard oor.

A nozzle type HF is suitable for use only on hard oor.

A nozzle of type CA is suitable for use only on carpet.

The other nozzles are accessories for specialist cleaning tasks and are recommended

for occasional use only.

All accessories can be tted to the end of the handle or the end of the telescopic tube.

Parquet Nozzle* – For parquet oors and other delicate oors.

Mini Turbo Nozzle* – Use the mini turbo nozzle on stairs or for deep cleaning on textile

surfaces and other hard to clean areas. Particularly suitable for allergen removal.

IMPORTANT: Do not use the turbo and mini turbo nozzles on rugs with long fringes,

animal hides and carpet pile deeper than 15mm. Do not keep the nozzle stationary while

the brush is rotating.

GB

USER CHECKLIST

Should you have a problem with your product, complete the simple user checklist before

calling the Hoover customer service.

• Is there a working electricity supply to the product? Check with another electrical

product.

• Is the dust bin full? Inspect and empty.

Derecelendirme

Bu kılavuz hakkında daha fazla bilgi

Hoover DVE01BL 011 Elektrikli süpürge cihazınız için basılı bir kılavuza sahip olmanın güzel bir şey olduğunun farkındayız. Kılavuzu her zaman web sitemizden indirebilir ve kendiniz yazdırabilirsiniz. Orijinal bir kılavuza sahip olmak istiyorsanız Hoover ile iletişime geçmenizi öneririz. Orijinal bir kılavuz sağlayabilirler. Hoover DVE01BL 011 Elektrikli süpürge cihazınızın kılavuzunu farklı bir dilde mi arıyorsunuz? Ana sayfamızdan tercih ettiğiniz dili seçin ve mevcut olup olmadığını görmek için model numarasını arayın.

Özellikler

Hoover Elektrikli süpürgeler için tüm kılavuzlar
Elektrikli süpürgeler ile ilgili daha fazla kılavuz

Hoover DVE01BL 011 Elektrikli süpürge hakkında Sıkça Sorulan Sorular

Destek ekibimiz faydalı ürün bilgileri arar ve sıkça sorulan soruları cevaplar. Sıkça sorulan sorularda hatalı bir cevaba rastlamanız halinde lütfen bunu iletişim formunu kullanarak bize bildirin.

İlgili ürünler

Kullanım kılavuzu

Hoover HF322AFP 011 Elektrikli süpürge

Kullanım kılavuzu

Hoover KS51PET 011 550W Elektrikli süpürge

Kullanım kılavuzu

Hoover TX40PET 011 Elektrikli süpürge

Kullanım kılavuzu

Hoover HP330ALG 011 Elektrikli süpürge

Kullanım kılavuzu

Hoover HF920P 001 Elektrikli süpürge

Kullanım kılavuzu

Hoover HP730ALG 011 Elektrikli süpürge

Kullanım kılavuzu

Hoover PC18 011 Elektrikli süpürge

Kullanım kılavuzu

Hoover SE81_SE10011 Elektrikli süpürge

İlgili kategoriler