Kullanım kılavuzu Panasonic TX-39DW304 LCD televizyon

Kullanım kılavuzu

English - 11 -

Switching On/Off

To Switch the TV On

Connect the power cord to a power source such as a

wall socket (220-240V AC, 50 Hz). Switch the “

”

button on the TV(switch position may differ depending

on the model) to position “|” so the TV will switch into

standby mode. Then the standby LED lights up.

To switch on the TV from standby mode either:

• Press the Standby button, Programme +/- or a

numeric button on the remote control.

• Press the side function switch on the TV until the TV

comes on from standby.

To Switch the TV Off

Press the Standby button on the remote control or

press the side function switch on the TV until the TV

switches into standby mode.

Switch the “

” button on the TV to position 2 as

illustrated -

, so the TV will switch off.

, switch is used for turning the TV on or off.

Note:

The position of the power switch may differ depending

on the model.

To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched into standby mode, the

standby LED can blink to indicate that features such as

Standby Search, Over Air Download or Timer is active. The

LED can also blink when you switch on the TV from standby

mode.

First Time Installation

When turned on for the first time, the language

selection screen is displayed. Select the desired

language and press OK.

On the next screen, set your preferences using the

navigation buttons.

Note: Depending on the Country selection you may be asked

to set and conrm a PIN at this point. The selected PIN cannot

be 0000. You have to enter it if you are asked to enter a PIN

for any menu operation later.

About Selecting Broadcast Type

Aerial: If Aerial broadcast search option is turned on,

the TV will search for digital terrestrial broadcasts after

other initial settings are completed.

Cable: If Cable broadcast search option is turned on,

the TV will search for digital cable broadcasts after

other initial settings are completed. According to your

other preferences a conrmation message may be

displayed before starting to search. Select YES and

press OK to proceed. To cancel operation, select NO

and press OK. You can select Network or set values

such as Frequency, Network ID and Search Step.

When nished, press OK button.

Note: Searching duration will change depending on the

selected Search Step.

Satellite: If Satellite broadcast search option is

turned on, the TV will search for digital satellite

broadcasts after other initial settings are completed.

Before satellite search is performed some settings

should be made. Antenna Type menu will be

displayed rst. You can select Antenna Type as

Direct, Unicable or DiSEqC switch by using “ ” or

“ ” buttons.

• Direct: If you have a single receiver and a direct

satellite dish, select this antenna type. Press OK to

continue. Select an available satellite on the next

screen and press OK to scan for services.

• Unicable: If you have multiple receivers and a

unicable system, select this antenna type. Press

OK to continue. Congure settings by following

instructions on the next screen. Press OK to scan

for services.

• DiSEqC switch: If you have multiple satellite dishes

and a DiSEqC switch, select this antenna type.

Press OK to continue. You can set four DiSEqC

options (if available) on the next screen. Press OK

button to scan the rst satellite in the list.

Analogue: If Analogue broadcast search option is

turned on, the TV will search for analogue broadcasts

after other initial settings are completed.

Additionally you can set a broadcast type as your

favourite one. Priority will be given to the selected

broadcast type during the search process. When

nished, press OK to continue.

You can activate Store Mode option at this point. This

option will congure your TV’s settings for best display

quality. This option is intended only for store use. It is

recommended to select Home Mode for home use.

This option will be available in Setup>More menu and

can be turned off/on later.

Press OK button on the remote control to continue.

After the initial settings are completed TV will start

to search for available broadcasts of the selected

broadcast types.

Derecelendirme

Bu kılavuz hakkında daha fazla bilgi

Panasonic TX-39DW304 LCD televizyon cihazınız için basılı bir kılavuza sahip olmanın güzel bir şey olduğunun farkındayız. Kılavuzu her zaman web sitemizden indirebilir ve kendiniz yazdırabilirsiniz. Orijinal bir kılavuza sahip olmak istiyorsanız Panasonic ile iletişime geçmenizi öneririz. Orijinal bir kılavuz sağlayabilirler. Panasonic TX-39DW304 LCD televizyon cihazınızın kılavuzunu farklı bir dilde mi arıyorsunuz? Ana sayfamızdan tercih ettiğiniz dili seçin ve mevcut olup olmadığını görmek için model numarasını arayın.

Özellikler

Panasonic LCD televizyonlar için tüm kılavuzlar
LCD televizyonlar ile ilgili daha fazla kılavuz

Panasonic TX-39DW304 LCD televizyon hakkında Sıkça Sorulan Sorular

Destek ekibimiz faydalı ürün bilgileri arar ve sıkça sorulan soruları cevaplar. Sıkça sorulan sorularda hatalı bir cevaba rastlamanız halinde lütfen bunu iletişim formunu kullanarak bize bildirin.

İlgili ürünler

Kullanım kılavuzu

Panasonic TX-65CXR800 LCD televizyon

Kullanım kılavuzu

Panasonic TX-43FXR610 LCD televizyon

Kullanım kılavuzu

Panasonic TX-49ESR500 LCD televizyon

Kullanım kılavuzu

Panasonic TX-L32BLW6 LCD televizyon

Kullanım kılavuzu

Panasonic TX-50CXR800 LCD televizyon

Kullanım kılavuzu

Panasonic TX-49DXR600 LCD televizyon

Kullanım kılavuzu

Panasonic TX-65CW324 LCD televizyon

Kullanım kılavuzu

Panasonic TX-32DSR500 LCD televizyon

İlgili kategoriler