Kullanım kılavuzu Panasonic TX-39DW304 LCD televizyon

Kullanım kılavuzu

English - 18 -

Event Details (Info button): Displays detailed

information about selected programmes.

Filter (Blue button): Views ltering options.

Programme Options

Use the navigation buttons to highlight a programme

and press OK button to display Event Options menu.

The following options are available.

Select Channel: Using this option, you can switch to

the selected channel.

Set Timer on Event / Delete Timer on Event: After

you have selected a programme in the EPG menu,

press the OK button. Select Set Timer on Event

option and press the OK button. You can set a timer

for future programmes. To cancel an already set timer,

highlight that programme and press the OK button.

Then select Delete Timer on Event option. The timer

will be cancelled.

Notes: You cannot switch to any other channel or source while

there is an active timer on the current channel.

It is not possible to set timer for two or more individual events

at the same time interval.

Teletext Services

Press the Text button to enter. Press again to activate

mix mode, which allows you to see the teletext page and

the TV broadcast at the same time. Press once more

to exit. If available, sections in the teletext pages will

become colour-coded and can be selected by pressing

the coloured buttons. Follow the instructions displayed

on the screen.

Digital Teletext

Press the Text button to view digital teletext information.

Operate it with the coloured buttons, cursor buttons

and the OK button. The operation method may differ

depending on the contents of the digital teletext. Follow

the instructions displayed on the digital teletext screen.

When the Text button is pressed again, the TV returns

to television broadcast.

Software Upgrade

Your TV is capable of nding and updating the rmware

automatically via the broadcast signal.

Software upgrade search via user interface

On the main menu select Setup and press the OK

button. Setup Menu will be displayed. Then select

More and press the OK button. Navigate to Software

upgrade and press the OK button. In Upgrade

options menu select Scan for upgrade and press

OK button to check for a new software upgrade.

If a new upgrade is found, it starts to download

the upgrade. After the download is completed

confirm the question asking about rebooting the

TV by pressing the OK to continue with the reboot

operation.

3 AM search and upgrade mode

Your TV will search for new upgrades at 3:00 o’clock if

Automatic scanning option in the Upgrade options

menu is set to Enabled and if the TV is connected

to an aerial signal. If a new software is found and

downloaded successfully, it will be installed at the

next power on.

Note: Do not unplug the power cord while led is blinking

during the reboot process. If the TV fails to come on after the

upgrade, unplug, wait for two minutes then plug it back in.

Troubleshooting & Tips

Tv will not turn on

Make sure the power cord is plugged in securely to

wall outlet. Check if batteries are exhausted. Press

the Power button on the TV.

Poor picture

• Check if you have selected the correct TV system.

• Low signal level can cause picture distortion. Please

check antenna access.

• Check if you have entered the correct channel

frequency if you have done manual tuning.

• The picture quality may degrade when two devices

are connected to the TV at the same time. In such

a case, disconnect one of the devices.

No picture

• This means your TV is not receiving any transmission.

Make sure the correct source has been selected.

• Is the antenna connected properly?

• Is the antenna cable damaged?

• Are suitable plugs used to connect the antenna?

• If you are in doubt, consult your dealer.

No sound

• Check if the TV is muted. Press the Mute button or

increase the volume to check.

• Sound may be coming from only one speaker. Check

the balance settings from Sound menu.

Remote control - no operation

• The batteries may be exhausted. Replace the

batteries.

Input sources - can not be selected

• If you cannot select an input source, it is possible

that no device is connected. If not;

• Check the AV cables and connections if you are

trying to switch to the input source dedicated to the

connected device.

Derecelendirme

Bu kılavuz hakkında daha fazla bilgi

Panasonic TX-39DW304 LCD televizyon cihazınız için basılı bir kılavuza sahip olmanın güzel bir şey olduğunun farkındayız. Kılavuzu her zaman web sitemizden indirebilir ve kendiniz yazdırabilirsiniz. Orijinal bir kılavuza sahip olmak istiyorsanız Panasonic ile iletişime geçmenizi öneririz. Orijinal bir kılavuz sağlayabilirler. Panasonic TX-39DW304 LCD televizyon cihazınızın kılavuzunu farklı bir dilde mi arıyorsunuz? Ana sayfamızdan tercih ettiğiniz dili seçin ve mevcut olup olmadığını görmek için model numarasını arayın.

Özellikler

Panasonic LCD televizyonlar için tüm kılavuzlar
LCD televizyonlar ile ilgili daha fazla kılavuz

Panasonic TX-39DW304 LCD televizyon hakkında Sıkça Sorulan Sorular

Destek ekibimiz faydalı ürün bilgileri arar ve sıkça sorulan soruları cevaplar. Sıkça sorulan sorularda hatalı bir cevaba rastlamanız halinde lütfen bunu iletişim formunu kullanarak bize bildirin.

İlgili ürünler

Kullanım kılavuzu

Panasonic TX-65CXR800 LCD televizyon

Kullanım kılavuzu

Panasonic TX-43FXR610 LCD televizyon

Kullanım kılavuzu

Panasonic TX-49ESR500 LCD televizyon

Kullanım kılavuzu

Panasonic TX-L32BLW6 LCD televizyon

Kullanım kılavuzu

Panasonic TX-50CXR800 LCD televizyon

Kullanım kılavuzu

Panasonic TX-49DXR600 LCD televizyon

Kullanım kılavuzu

Panasonic TX-65CW324 LCD televizyon

Kullanım kılavuzu

Panasonic TX-32DSR500 LCD televizyon

İlgili kategoriler