Kullanım kılavuzu Philips BT1210 Sakal düzeltici

Kullanım kılavuzu

Caution

- This appliance is not

washable.Never immerse the

appliance in water and do not

rinse it under the tap (Fig. 2).

- Only use this appliance for its

intended purpose as shown

in the user manual.

- For hygienic reasons, the

appliance should only be

used by one person.

- Never use compressed air,

scouring pads, abrasive

cleaning agents or aggressive

liquids such as petrol or

acetone to clean the

appliance.

- Do not use the supply unit in

or near wall sockets that

contain an electric air

freshener to prevent

irreparable damage to the

supply unit.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable

standards and regulations regarding exposure to

electromagnetic fields.

General

- The supply unit is suitable for mains voltages

ranging from 100 to 240 volts.

- The supply unit transforms 100-240 volts to a

safe low voltage of less than 24 volts.

Charging

- When the battery is almost empty, the battery

status indicator lights up orange (Fig. 3).

- When the appliance is charging, the battery

status indicator lights up green.

Charging with the supply unit

Charge the appliance before first use and when the

display indicates that the battery is almost empty.

When the appliance has charged for 8 hours, it has

a cordless operating time of up to 60 minutes.

1 Make sure the appliance is switched off.

2 Insert the micro USB plug into the appliance

and insert the USB plug in the supply unit (Fig.

4).

3 Put the supply unit in the wall socket.

4 After charging, remove the supply unit from the

wall socket and pull the micro USB plug out of

the appliance.

Using the appliance

Note: This appliance can be used without cord or

when it is connected to the wall socket.

Note: Switch off and clean the appliance after each

use.

Detaching and attaching cutting elements

1 To detach a cutting element, push upwards

against the teeth of the cutting element and

take it off the handle (Fig. 5).

2 To attach a cutting element, insert the lug of the

cutting element into the guiding slot at the front

and push the back of the cutting element onto

the appliance ('click') (Fig. 6).

Attaching and detaching combs

1 To attach any type of comb onto a cutting

element,slide the front part of the comb onto

the teeth and push the projection at the back of

the comb into the appliance ('click') (Fig. 7).

2 To detach any type of comb from the cutting

element, carefully pull its back part off the

appliance and then slide it off the cutting

element (Fig. 8).

Note: When trimming for the first time, start by

using the comb with the maximum trimming

length setting to familiarize yourself with the

appliance.

Switching the appliance on and off

1 Press the travel lock button, then slide the

on/off button upwards to switch on the

appliance (Fig. 9).

2 Slide the on/off button downwards to switch

off the appliance.

Trimming without comb

Use the full-size beard trimmer without a comb to

trim hair close to the skin (to a length of 1/32in

(0.5mm) or to create clean lines around your beard,

neck and sideburns.

1 To trim hair close to the skin, place the flat side

of the cutting element against your skin and

make strokes against the direction of hair

growth (Fig. 10).

2 For edging, hold the cutting element

perpendicular to the skin and move it upwards

or downwards with gentle pressure (Fig. 11).

Trimming with comb

Note: When you trim for the first time, start at the

highest length setting to familiarize yourself with

the appliance.

- You can use the beard and stubble comb

attached to the cutting element to groom your

beard and moustache in your preferred style.

1 Attach the comb (Fig. 7) to the full-size beard

trimmer.

2 Switch on the appliance.

Derecelendirme

Bu kılavuz hakkında daha fazla bilgi

Philips BT1210 Sakal düzeltici cihazınız için basılı bir kılavuza sahip olmanın güzel bir şey olduğunun farkındayız. Kılavuzu her zaman web sitemizden indirebilir ve kendiniz yazdırabilirsiniz. Orijinal bir kılavuza sahip olmak istiyorsanız Philips ile iletişime geçmenizi öneririz. Orijinal bir kılavuz sağlayabilirler. Philips BT1210 Sakal düzeltici cihazınızın kılavuzunu farklı bir dilde mi arıyorsunuz? Ana sayfamızdan tercih ettiğiniz dili seçin ve mevcut olup olmadığını görmek için model numarasını arayın.

Özellikler

Philips Sakal düzelticiler için tüm kılavuzlar
Sakal düzelticiler ile ilgili daha fazla kılavuz

Philips BT1210 Sakal düzeltici hakkında Sıkça Sorulan Sorular

Destek ekibimiz faydalı ürün bilgileri arar ve sıkça sorulan soruları cevaplar. Sıkça sorulan sorularda hatalı bir cevaba rastlamanız halinde lütfen bunu iletişim formunu kullanarak bize bildirin.

İlgili ürünler

Kullanım kılavuzu

Philips QT4023 Sakal düzeltici

Kullanım kılavuzu

Philips MG5730 Sakal düzeltici

Kullanım kılavuzu

Philips MG3757 Sakal düzeltici

Kullanım kılavuzu

Philips SBT720 Star Wars Sakal düzeltici

Kullanım kılavuzu

Philips QS6161 Sakal düzeltici

Kullanım kılavuzu

Philips QT4009 Sakal düzeltici

Kullanım kılavuzu

Philips BT9810 Sakal düzeltici

Kullanım kılavuzu

Philips MG7730 Sakal düzeltici

İlgili kategoriler