Kullanım kılavuzu Philips GC3591 Ütü

Kullanım kılavuzu

ENGLISH

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the

support that Philips offers, register your product at www.philips.com/welcome.

Important

Read this user manual carefully before you use the appliance and save it for future reference.

Danger

- Never immerse the iron in water.

Warning

- Check if the voltage indicated on the appliance corresponds to the local mains

voltage before you connect the appliance.

- Do not use the appliance if the plug, the mains cord or the appliance itself shows

visible damage, or if the appliance has been dropped or leaks.

- If the mains cord is damaged, you must have it replaced by Philips, a service centre

authorised by Philips or similarly qualified persons in order to avoid a hazard.

- Never leave the appliance unattended when it is connected to the mains.

- This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by

a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

- Do not let the mains cord come into contact with the hot soleplate of the iron.

Caution

- Only connect the appliance to an earthed wall socket.

- Check the mains cord regularly for possible damage.

- The soleplate of the iron can become extremely hot and may cause burns if touched.

- When you have finished ironing, when you clean the appliance, when you fill or

empty the water tank and also when you leave the iron even for a short while: set

the steam control to position 0, put the iron on its heel and remove the mains plug

from the wall socket.

- Always place and use the iron on a stable, level and horizontal surface.

- Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals

in the water tank.

- This appliance is intended for household use only.



This Philips appliance complies with all standards regarding electromagnetic fields (EMF).

If handled properly and according to the instructions in this user manual, the appliance is

safe to use based on scientific evidence available today.



A Spray nozzle

B Filling opening with cap

C Steam boost button ( 9)

D Spray button ( 8)

E Steam control

 Amber temperature light (specific types only: with red auto-off indication)

G Calc-Clean button

H Temperature dial

I Mains cord

J Heel

K Anti-Calc tablet (specific types only)

L Water tank

Not shown: filling cup



1 Remove any sticker, protective foil or plastic from the soleplate (Fig. 2).





Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals

in the water tank.

1 Make sure the appliance is unplugged.

2 Set the steam control to position 0 (= no steam) (Fig. 3).

3 Open the cap of the filling opening.

4 Tilt the iron backwards and use the filling cup to fill the water tank with tap

water up to the maximum level. (Fig. 4)

Do not fill the water tank beyond the MAX indication.

5 Close the cap of the filling opening (‘click’).



1 Put the iron on its heel.

2 To set the required ironing temperature, turn the temperature dial to the

appropriate position (Fig. 5).

Check the laundry care label for the required ironing temperature:

- 1 for synthetic fabrics (e.g. acrylic, nylon, polyamide, polyester)

- 1 for silk

- 2 for wool

- 3 for cotton and linen

If you do not know what kind or kinds of fabric an article is made of, determine the right

ironing temperature by ironing a part that is not visible when you wear or use the article.

Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny

patches. To prevent stains, do not use the spray function.

Start ironing the articles that require the lowest ironing temperature, such as those

made of synthetic fibres.

3 Put the mains plug in an earthed wall socket.

, The amber temperature light goes on (Fig. 6).

4 When the temperature light goes out, wait a while before you start ironing.

The temperature light goes on from time to time during ironing.



Note: The iron may give off some smoke when you use it for the rst time. This stops after a

short while.

Steam ironing

1 Make sure that there is enough water in the water tank.

2 Set the recommended ironing temperature (see chapter ‘Preparing for use’,

section ‘Setting the temperature’).

3 Set the appropriate steam setting. Make sure that the steam setting is suitable for

the set ironing temperature: (Fig. 7)

- 1 - 2 for moderate steam (temperature settings 2 to 3)

- 3 - 4 for maximum steam (temperature settings 3 to MAX)

Note: The iron starts to produce steam as soon as it has reached the set temperature.

Note: If the selected ironing temperature is too low (MIN to 2), water may drip from the

soleplate (see chapter ‘Features’, section ‘Drip stop’).



1 Set the steam control to position 0 (= no steam) (Fig. 3).

2 Set the recommended ironing temperature (see chapter ‘Preparing for use’,

section ‘Setting the temperature’).



Spray function

You can use the spray function at any temperature to moisten the article to be ironed.

This helps remove stubborn creases.

1 Make sure that there is enough water in the water tank.

2 Press the spray button several times to moisten the article to be ironed (Fig. 8).



A powerful steam boost helps to remove very stubborn creases.

The steam boost function can only be used at temperature settings between 2 and MAX.

1 Press and release the steam boost button (Fig. 9).



The concentrated steam boost from the long vents in the Steam Tip enhances the

distribution of steam into every part of your garment. The concentrated steam boost

function can only be used at temperature settings between 2 and MAX.

1 Press and release the steam boost button (Fig. 10).



You can also use the steam boost function when you hold the iron in vertical position.

This is useful for removing creases from hanging clothes, curtains etc.

1 Hold the iron in vertical position and press and release the steam boost

button (Fig. 11).

Never direct the steam at people.



This iron is equipped with a drip-stop function: the iron automatically stops producing

steam when the temperature is too low, to prevent water from dripping out of the

soleplate. When this happens you may hear a sound.

Derecelendirme

Bu kılavuz hakkında daha fazla bilgi

Philips GC3591 Ütü cihazınız için basılı bir kılavuza sahip olmanın güzel bir şey olduğunun farkındayız. Kılavuzu her zaman web sitemizden indirebilir ve kendiniz yazdırabilirsiniz. Orijinal bir kılavuza sahip olmak istiyorsanız Philips ile iletişime geçmenizi öneririz. Orijinal bir kılavuz sağlayabilirler. Philips GC3591 Ütü cihazınızın kılavuzunu farklı bir dilde mi arıyorsunuz? Ana sayfamızdan tercih ettiğiniz dili seçin ve mevcut olup olmadığını görmek için model numarasını arayın.

Özellikler

Philips Ütüler için tüm kılavuzlar
Ütüler ile ilgili daha fazla kılavuz

Philips GC3591 Ütü hakkında Sıkça Sorulan Sorular

Destek ekibimiz faydalı ürün bilgileri arar ve sıkça sorulan soruları cevaplar. Sıkça sorulan sorularda hatalı bir cevaba rastlamanız halinde lütfen bunu iletişim formunu kullanarak bize bildirin.

İlgili ürünler

Kullanım kılavuzu

Philips GC9325 Ütü

Kullanım kılavuzu

Philips GC9550 Ütü

Kullanım kılavuzu

Philips PSG7025 PerfectCare Ütü

Kullanım kılavuzu

Philips GC9660 PerfectCare Elite Plus Ütü

Kullanım kılavuzu

Philips DST7030 Ütü

Kullanım kılavuzu

Philips GC9242 PerfectCare Ütü

Kullanım kılavuzu

Philips PSG7024 PerfectCare Ütü

Kullanım kılavuzu

Philips GC4218 Ütü

İlgili kategoriler