Kullanım kılavuzu Dolmar MS-248.4C Çim düzeltme makinesi

Kullanım kılavuzu

6

Start the brushcutter only in accordance with the instructions.

– Do not use any other methods for starting the engine!

– Usethebrushcutterandthetoolsonlyforsuchapplicationsasspecied.

– Only start the engine, after the entire assembly is done. Operation of the

device is only permitted after all the appropriate accessories are attached!

– Before starting make sure that the cutting tool has no contact with hard

objectssuchasbranches,stonesetc.asthecuttingtoolwillrevolvewhen

starting.

– The engine is to be switched off immediately in case of any engine problems.

– Shouldthecuttingtoolhitstonesorotherhardobjects,immediatelyswitchoff

the engine and inspect the cutting tool.

– Inspect the cutting tool at short regular intervals for damage (detection of

hairline cracks by means of tapping-noise test).

– If the equipment gets heavy impact or fall, check the condition before

continuing work. Check the fuel system for fuel leakage and the controls

and safety devices for malfunction. If there is any damage or doubt, ask our

authorizedservicecenterfortheinspectionandrepair.

– Operate the equipment only with the shoulder harness attached which is

tobesuitablyadjustedbeforeputtingthebrushcutterintooperation.Itis

essentialtoadjusttheshoulderharnessaccordingtotheusersizetoprevent

fatigue occurring during use. Never hold the cutter with one hand during use.

– During operation always hold the brushcutter with both hands.

Always ensure a safe footing.

– Operate the equipment in such a manner as to avoid inhalation of the exhaust

gases. Never run the engine in enclosed rooms (risk of gas poisoning).

Carbon monoxide is an odorless gas.

– Switch off the engine when resting and when leaving the equipment

unattended, and place it in a safe location to prevent danger to others or

damage to the machine.

– Never put the hot brushcutter onto dry grass or onto any combustible

materials.

– Always install the approved cutting tool guard onto the equipment before

starting the engine.

Otherwisecontactwiththecuttingtoolmaycauseseriousinjury.

– All protective installations and guards supplied with the machine must be

used during operation.

– Neveroperatetheenginewithfaultyexhaustmufer.

– Shut off the engine during transport.

– When transporting the equipment, always attach the cover to the cutting

blade.

– Ensure safe position of the equipment during car transportation to avoid fuel

leakage.

– When transporting, ensure that the fuel tank is completely empty.

– When unloading the equipment from the truck, never drop the Engine to the

ground or this may severely damage the fuel tank.

– Except in case of emergency, never drop or cast the equipment to the ground

or this may severely damage the equipment.

– Remember to lift the entire equipment from the ground when moving the

equipment. Dragging the fuel tank is highly dangerous and will cause damage

andleakageoffuel,possiblycausingre.

Refueling

– Shutofftheengineduringrefueling,keepawayfromopenamesanddonot

smoke.

– Avoid skin contact with mineral oil products. Do not inhale fuel vapor. Always

wear protective gloves during refueling. Change and clean protective clothing

at regular intervals.

– Take care not to spill either fuel or oil in order to prevent soil contamination

(environmental protection). Clean the brushcutter immediately after fuel has

been spilt.

– Avoid any fuel contact with your clothing. Change your clothing instantly if

fuelhasbeenspiltonit(topreventclothingcatchingre).

– Inspect the fuel cap at regular intervals making sure that it can be securely

fastened and does not leak.

– Carefully tighten the fuel tank cap. Change location to start the engine (at

least 3 meters away from the place of refueling).

– Never refuel in closed rooms. Fuel vapors accumulate at ground lever (risk of

explosions).

– Only transport and store fuel in approved containers. Make sure the fuel

stored is not accessible to children.

Derecelendirme

Bu kılavuz hakkında daha fazla bilgi

Dolmar MS-248.4C Çim düzeltme makinesi cihazınız için basılı bir kılavuza sahip olmanın güzel bir şey olduğunun farkındayız. Kılavuzu her zaman web sitemizden indirebilir ve kendiniz yazdırabilirsiniz. Orijinal bir kılavuza sahip olmak istiyorsanız Dolmar ile iletişime geçmenizi öneririz. Orijinal bir kılavuz sağlayabilirler. Dolmar MS-248.4C Çim düzeltme makinesi cihazınızın kılavuzunu farklı bir dilde mi arıyorsunuz? Ana sayfamızdan tercih ettiğiniz dili seçin ve mevcut olup olmadığını görmek için model numarasını arayın.

Özellikler

Dolmar Çim düzeltme makineleri için tüm kılavuzlar
Çim düzeltme makineleri ile ilgili daha fazla kılavuz

İlgili ürünler

Kullanım kılavuzu

Dolmar AT-1827H Çim düzeltme makinesi

Kullanım kılavuzu

Dolmar ET-101C Çim düzeltme makinesi

Kullanım kılavuzu

Dolmar AT-3726L Çim düzeltme makinesi

Kullanım kılavuzu

Dolmar AT-1832CZ Çim düzeltme makinesi

Kullanım kılavuzu

Dolmar AT-1827LGH Çim düzeltme makinesi

Kullanım kılavuzu

Dolmar AT-1832C Çim düzeltme makinesi

Kullanım kılavuzu

Dolmar AT-1832CRT Çim düzeltme makinesi

Kullanım kılavuzu

Dolmar AT-3726A Çim düzeltme makinesi

İlgili kategoriler