Kullanım kılavuzu Dolmar MS-248.4C Çim düzeltme makinesi

Kullanım kılavuzu

7

Caution:

Kickback

Diagrammatic

gure

Diagrammatic

gure

Method of operation

– Only use in good light and visibility. During the winter season beware of

slippery or wet areas, ice and snow (risk of slipping). Always ensure a safe

footing.

– Never cut above waist height.

– Never stand on a ladder.

– Never climb up into trees to perform cutting operation.

– Never work on unstable surfaces.

– Remove sand, stones, nails etc. found within the working range.

Foreign particles may damage the cutting tool and can cause dangerous

kick-backs.

– Before commencing cutting, the cutting tool must have reached full working

speed.

– When using metal blades, swing the tool evenly in half-circle from right to left,

like using a scythe.

If grass or branches get caught between the cutting tool and guard, always

stop the engine before cleaning. Otherwise unintentional blade rotation may

causeseriousinjury.

– Take a rest to prevent loss of control caused by fatigue. We recommend to

take a 10 to 20-minute rest every hour.

Cutting Tools

– Useanapplicablecuttingtoolforthejobinhand.

Nylon cutting heads (string trimmer heads) are suitable for trimming lawn

grass.

Metal blades are suitable for cutting weeds, high grasses, bushes, shrubs,

underwood, thicket, and the like.

Neveruseotherbladesincludingmetalmulti-piecepivotingchainsandail

blades.Otherwiseseriousinjurymayresult.

– When using metal blades, avoid “kickback” and always prepare for an

accidental kickback. See the section “Kickback” and “Kickback prevention.”

Kickback (blade thrust)

– Kickback (blade thrust) is a sudden reaction to a caught or bound cutting

blade. Once it occurs, the equipment is thrown sideway or toward the

operatoratgreatforceanditmaycauseseriousinjury.

– Kickback occurs particularly when applying the blade segment between 12

and 2 o’clock to solids, bushes and trees with 3 cm or larger diameter.

– To avoid kickback:

• Apply the segment between 8 and 11 o’clock;

• Never apply the segment between 12 and 2 o’clock;

• Never apply the segment between 11 and 12 o’clock and between 2 and

5 o’clock, unless the operator is well trained and experienced and does it at

his/her own risk;

• Never use cutting blades close to solids, such as fences, walls, tree trunks

and stones;

• Never use cutting blades vertically, for such operations as edging and

trimming hedges.

Vibration

– People with poor circulation who are exposed to excessive vibration may

experienceinjurytobloodvesselsorthenervoussystem.Vibrationmay

causethefollowingsymptomstooccurinthengers,handsorwrists:“Falling

asleep” (numbness), tingling, pain, stabbing sensation, alteration of skin color

or of the skin. If any of these symptoms occur, see a physician!

– Toreducetheriskof“whitengerdisease”,keepyourhandswarmduring

operation and well maintain the equipment and accessories.

Maintenance instructions

– Haveyourequipmentservicedbyourauthorizedservicecenter,alwaysusing

only genuine replacement parts. Incorrect repair and poor maintenance can

shorten the life of the equipment and increase the risk of accidents.

– The condition of the cutter, in particular of the cutting tool of the protective

devices and also of the shoulder harness must be checked before

commencing work. Particular attention is to be paid to the cutting blades

which must be correctly sharpened.

– Turn off the engine and remove spark plug connector when replacing or

sharpening cutting tools, and also when cleaning the cutter or cutting tool.

Derecelendirme

Bu kılavuz hakkında daha fazla bilgi

Dolmar MS-248.4C Çim düzeltme makinesi cihazınız için basılı bir kılavuza sahip olmanın güzel bir şey olduğunun farkındayız. Kılavuzu her zaman web sitemizden indirebilir ve kendiniz yazdırabilirsiniz. Orijinal bir kılavuza sahip olmak istiyorsanız Dolmar ile iletişime geçmenizi öneririz. Orijinal bir kılavuz sağlayabilirler. Dolmar MS-248.4C Çim düzeltme makinesi cihazınızın kılavuzunu farklı bir dilde mi arıyorsunuz? Ana sayfamızdan tercih ettiğiniz dili seçin ve mevcut olup olmadığını görmek için model numarasını arayın.

Özellikler

Dolmar Çim düzeltme makineleri için tüm kılavuzlar
Çim düzeltme makineleri ile ilgili daha fazla kılavuz

İlgili ürünler

Kullanım kılavuzu

Dolmar AT-1827H Çim düzeltme makinesi

Kullanım kılavuzu

Dolmar ET-101C Çim düzeltme makinesi

Kullanım kılavuzu

Dolmar AT-3726L Çim düzeltme makinesi

Kullanım kılavuzu

Dolmar AT-1832CZ Çim düzeltme makinesi

Kullanım kılavuzu

Dolmar AT-1827LGH Çim düzeltme makinesi

Kullanım kılavuzu

Dolmar AT-1832C Çim düzeltme makinesi

Kullanım kılavuzu

Dolmar AT-1832CRT Çim düzeltme makinesi

Kullanım kılavuzu

Dolmar AT-3726A Çim düzeltme makinesi

İlgili kategoriler