Kullanım kılavuzu Timex T2P043 Kol saati

Kullanım kılavuzu

2

ENGLISH 222-095001-02

Congratulations on purchasing your TIMEX

®

watch. Please read these

instructions carefully to understand how to operate your Timex timepiece.

Your watch may not have all of the features described in this booklet.

For more information, please visit: Timex.com

HOW TO START YOUR WATCH

To start your watch remove the plastic guard from under the crown, then press

the crown in against the case. The second hand will begin advancing in one-

second intervals.

Some deep-depth water-resistant watches require the setting crown to be

screwed in to secure water-resistance. If your watch case has a protrusion with

screw threads, the crown must be screwed in after setting the watch.

To screw in, push the crown firmly against the threaded protrusion and hold

in while turning the crown clockwise. Continue to screw in the crown until it is

tight. You will need to unscrew the crown (counter-clockwise) before pulling it

out the next time you want to set your watch.

WATER AND SHOCK RESISTANCE

If your watch is water-resistant, meter marking (WR_M) is indicated.

Water-Resistance Depth p.s.i.a. * Water pressure Below Surface

30m/98ft

60

50m/164ft

86

100m/328ft

160

200m/656ft

284

*pounds per square inch absolute

WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY

BUTTONS OR PULL OUT THE CROWN UNDER WATER UNLESS YOUR

WATCH IS INDICATED AS 200 METER WATER-RESISTANT.

1. Watch is water-resistant only as long as crystal, crown and case remain

intact.

2. Watch is not a diver watch and should not be used for diving.

3. Rinse watch with fresh water after exposure to salt water.

4. Shock-resistance will be indicated on the watch face or caseback. Watches

are designed to pass ISO test for shock-resistance. However, care should be

taken to avoid damaging the crystal.

INDIGLO

®

NIGHT-LIGHT

Press button or crown to activate light. Electroluminescent technology used in

the INDIGLO

®

night-light illuminates entire watch face at night and in low light

conditions.

ANALOG/DIGITAL MODELS

4-PUSHER ANALOG/DIGITAL MODEL WITH INDIGLO

®

NIGHT-LIGHT &

NIGHT-MODE

®

FEATURE

“B”

PUSHER

“C”

CROW N

POSITION

PUSHER

“D”

A B

PUSHER

“B”

PUSHER

“A ”

PUSHER

“C”

CROW N

POSITION

PUSHER

“D”

A B

PUSHER

PUSHER

“A”

TO USE INDIGLO

®

NIGHT-LIGHT

1. PRESS pusher “B” to illuminate the entire dial (Both analog and digital).

TO USE NIGHT-MODE

®

FEATURE

1. PRESS and HOLD pusher “B” for 3 seconds until you hear a beep.

2. Pressing any pusher will cause the INDIGLO

®

night-light to illuminate and

stay on for 3 seconds.

3. NIGHT-MODE

®

feature will last for 3 hours.

4. To deactivate NIGHT-MODE

®

feature PRESS and HOLD pusher “B” for 3

seconds.

ANALOG TIME

TO SET ANALOG TIME

1. PULL the crown out to the “B” position.

2. TURN the crown either way to the correct time.

3. PUSH in the crown to the “A” position.

DIGITAL DISPLAY

1. The Digital display changes to each function every time you PRESS pusher

“A”. (As illustrated below):

TIME / CALENDAR

DAILY ALARM

COUNTDOWN TIMER

CHRONOGRAPH

DUAL TIME

START

Press and release MODE

button once.

DUAL TIME CHRONOGRAPH

COUNTDOW N

TIME/

CALENDAR

DAILY

ALARM

TIMER

CALENDAR

HOUR MINUTE SECOND MONTH DATE DAY

Press and release MODE

button once.

Press and release MODE

button once.

TO SET TIME / CALENDAR

1. PRESS pusher “A” to bring up TIME / CALENDAR display.

2. PRESS and HOLD pusher “D”. HOLD will display until second flashes.

3. PRESS pusher “C” to reset to second to “00”.

4. PRESS pusher “A” to let hour flash.

5. PRESS pusher “C” to advance hour.

6. PRESS pusher “A” and “C” as above to adjust tens of minutes, minute, year,

month, date, day and 12/24 hour format.

7. PRESS pusher “D” to complete setting.

8. View or select the TIME or CALENDAR to appear in your digital display.

• PRESS pusher “C” to view the CALENDAR for 2 seconds.

• PRESS and HOLD pusher “C” for 3 seconds until the watch beeps to

change the display to CALENDAR.

• To view or change the display to TIME, repeat the steps above.

NOTE: “A” or “P” will appear when the 12-Hour format is selected.

• Set this time to coordinate with the Analog time or another time zone.

• PRESS and HOLD pusher “C” for 2 seconds in setting mode, to activate fast

advance.

FOLLOWED BY

THE CURRENT

ALARM SETTING

TIME AND TIME

ZONE.

WILL

APPEAR

FOR 3

SECONDS

Derecelendirme

Bu kılavuz hakkında daha fazla bilgi

Timex T2P043 Kol saati cihazınız için basılı bir kılavuza sahip olmanın güzel bir şey olduğunun farkındayız. Kılavuzu her zaman web sitemizden indirebilir ve kendiniz yazdırabilirsiniz. Orijinal bir kılavuza sahip olmak istiyorsanız Timex ile iletişime geçmenizi öneririz. Orijinal bir kılavuz sağlayabilirler. Timex T2P043 Kol saati cihazınızın kılavuzunu farklı bir dilde mi arıyorsunuz? Ana sayfamızdan tercih ettiğiniz dili seçin ve mevcut olup olmadığını görmek için model numarasını arayın.

Özellikler

Timex Kol saatleri için tüm kılavuzlar
Kol saatleri ile ilgili daha fazla kılavuz

Timex T2P043 Kol saati hakkında Sıkça Sorulan Sorular

Destek ekibimiz faydalı ürün bilgileri arar ve sıkça sorulan soruları cevaplar. Sıkça sorulan sorularda hatalı bir cevaba rastlamanız halinde lütfen bunu iletişim formunu kullanarak bize bildirin.

İlgili ürünler

Kullanım kılavuzu

Timex TW2V40100JT Easy Reader Kol saati

Kullanım kılavuzu

Timex TW2V42400VQ Waterbury Kol saati

Kullanım kılavuzu

Timex TW2U97800VQ Waterbury Kol saati

Kullanım kılavuzu

Timex TW2V37400JR Waterbury Kol saati

Kullanım kılavuzu

Timex TW2V40800JR Expedition Kol saati

Kullanım kılavuzu

Timex TW2V52600VQ Waterbury Kol saati

Kullanım kılavuzu

Timex TW2V45500VQ Waterbury Kol saati

Kullanım kılavuzu

Timex TW2V45700VQ Waterbury Kol saati

İlgili kategoriler