Kullanım kılavuzu Bosch AXT 2500 HP Bahçe öğütücüsü

Kullanım kılavuzu

English - 3

The rotational direction switch 2 must be turned to

the right. The feed intake 10 must be empty (see

figure ).

Starting:

Set the on/off switch 1 to “I”.

Stopping:

Set the on/off switch 1 to “O”.

The motor will coast after switching off!

Restart Protection

A mains failure causes the on/off switch 1 to return

to the “0” position. The machine cannot restart on

its own when the power returns.

Rotational direction switch 2

(see figure )

Before switching the rotational direction, always

switch the machine off and wait until it stops.

Right position: The cutting roller pulls in and shreds

the material.

Left position: The cutting roller runs backward and

frees jammed material.

Overload Protection

Overloading (e. g. blocking of the cutting roller)

causes the machine to stop after a few seconds. The

on/off switch 1 springs to the “0” position. Switch

the rotational direction switch 2 to the left position

(backwards) and after a short period restart the ma-

chine.

Always wear eye protection and wear gloves

during use.

To collect the shredded material, hang the carrying

straps of the collection sack 5 on the hooks 9 on

both sides of the machine.

Insert the material to be shredded. The material will

be fed by the cutter roller 13 without further assist-

ance.

Longer material standing out from the ma-

chine could lash out when being pulled in

by the knives! Please keep at safe dis-

tance!

Only insert as much material so that the feed in-

take 10 will not be blocked up.

Shred withered, moist material and garden waste

which has been stored for some days alternately

with branches.

This prevents the cutting roller 13 from clogging.

Do not fill soft waste such as kitchen rubbish into the

shredder but compost directly.

Take care that the shredded material can fall freely

from the discharge chute 6 – danger of backing up!

The ventilation slots must not be covered by the col-

lecting bag or the shredded material.

Avoid blocking the discharge chute 6 with shredded

material as this could result in kickback of material

through the feed intake opening.

Branches become harder to shred depending on the

type, age and dryness of the wood.

For best results, shred fresh branches soon after

they have been cut.

Soft garden waste should be shredded in smaller

loads, particularly when wet. Any blockages can be

avoided by intermittently shredding branches.

The pressure plate 12 is factory adjusted and does

not require adjustment before the first use.

Adjustment of the pressure plate 12 is necessary as

a result of wear (shredded material, e. g. branches,

hangs together as a chain and is not properly cut

through):

Place the rotational direction switch 2 in the position

to the right and switch on the machine.

With the motor running, turn the adjustment knob 8

(if necessary, using the Allen key 7) one notch to the

right (clockwise direction) until a light grinding sound

can be heard (the cutting roller 13 cuts the pressure

plate 12 to the proper clearance, and some small

aluminium shavings fall out of the ejection chute 6).

Readjust only to the required extent, otherwise the

pressure plate 12 could wear unnecessarily.

Before switching the rotational direction,

always switch the machine off and wait un-

til it stops.

The material to be shredded is not pulled in:

■ The cutting roller 13 is running backward: Switch

rotational direction.

■ The material to be shredded is soft and wet: Push

into machine with a piece of wood or change to

shredding branches.

■ The material to be shredded jams in the feed

opening 10: Place rotational direction switch 2 in

the left position to free the material.

Starting and Stopping

Working Instructions

E

E

Advice on Shredding

Pressure Plate Adjustment

(see figure )

Malfunctions

F

F016 L70 439 - book.book Seite 3 Dienstag, 28. Februar 2006 7:57 07

13 • F016 L70 439 • TMS • 06.02

Derecelendirme

Bu kılavuz hakkında daha fazla bilgi

Bosch AXT 2500 HP Bahçe öğütücüsü cihazınız için basılı bir kılavuza sahip olmanın güzel bir şey olduğunun farkındayız. Kılavuzu her zaman web sitemizden indirebilir ve kendiniz yazdırabilirsiniz. Orijinal bir kılavuza sahip olmak istiyorsanız Bosch ile iletişime geçmenizi öneririz. Orijinal bir kılavuz sağlayabilirler. Bosch AXT 2500 HP Bahçe öğütücüsü cihazınızın kılavuzunu farklı bir dilde mi arıyorsunuz? Ana sayfamızdan tercih ettiğiniz dili seçin ve mevcut olup olmadığını görmek için model numarasını arayın.

Özellikler

Bosch Bahçe öğütücüleri için tüm kılavuzlar
Bahçe öğütücüleri ile ilgili daha fazla kılavuz

Bosch AXT 2500 HP Bahçe öğütücüsü hakkında Sıkça Sorulan Sorular

Destek ekibimiz faydalı ürün bilgileri arar ve sıkça sorulan soruları cevaplar. Sıkça sorulan sorularda hatalı bir cevaba rastlamanız halinde lütfen bunu iletişim formunu kullanarak bize bildirin.

İlgili ürünler

Kullanım kılavuzu

Bosch AXT Rapid 180 Bahçe öğütücüsü

Kullanım kılavuzu

Bosch AXT Rapid 200 Bahçe öğütücüsü

Kullanım kılavuzu

Bosch AXT 2000 HP Bahçe öğütücüsü

Kullanım kılavuzu

Bosch AXT 25 TC Bahçe öğütücüsü

Kullanım kılavuzu

Bosch AXT 2200 HP Bahçe öğütücüsü

Kullanım kılavuzu

Bosch AXT 1600 HP Bahçe öğütücüsü

Kullanım kılavuzu

Bosch AXT Rapid 2200 Bahçe öğütücüsü

Kullanım kılavuzu

Bosch AXT 25 D Bahçe öğütücüsü

İlgili kategoriler